Date: August 14th, 2021
Thanks for considering Fly your Car in Gander,
Below you will find the registration form for the event, if you wish to be a competitor, please sign up here.
We have not set a maximum number of car slots yet, but each slot gives a car 1 run per heat, and you will receive a competitor's package on day of the event. Each driver is required to pay a minimum of $50.00 registration fee, but as this is a fundraiser we encourage you to raise as much money as possible. You will find pledge sheets on the site in the menu under Fly your Car in Gander.
Once registered you will receive a schedule for the weekend of the event.
There are a few changes this year though, due to Covid-19 guidelines we'll have to enforce physical distancing strategies on race day.
Also, due to Covid-19 all participants are expected to have their own ECE/Snell Approved helmets, there will be no loaners available. Should you have any questions or concerns about this, please reach out to us and we'll assist as best we can. CNSR regulations will be followed. they are as follows;
4.5.1 Drivers and passengers must wear helmets during all track sessions.
4.5.2 Acceptable helmets:
• FIA 8860-2004
• FIA 8860-2010
• FIA 8859-2015
• Snell 2020 SA, or M 2020 D or M 2020 R
• Snell 2015 SA, or 2015 M
• Snell 2010 SA, 2010 SAH, or 2010 M (expiry 31.12.2023)
• SFI Foundation 31.1/2015
• SFI Foundation 31.1/2010
• ECE R22.05 ECE 22.05 (expiry: ten years after date of manufacture as noted on unaltered, helmet label)
4.5.3 Helmets homologated to Snell M, ECE 22.05, and ECE R22.05 standard are not acceptable for use in vehicles equipped with roll cages.
4.5.4 Helmets must be in good condition both inside and outside.
4.5.5 It is strongly recommended that helmets be discarded due to deterioration, after a serious accident or an impact to the helmet.
4.5.6 No helmet may be modified from its specification as manufactured, except in compliance with instructions approved by the manufacturer. Hardware may be mounted on a helmet for FIA/SFI approved HANS/FHR devices, provided the hardware is installed in accordance with recommendations provided by the manufacturer of the helmet and/or the devices.
4.5.7 Paint can react with helmet shell material and affect its protective capacity, therefore, where a manufacturer provides guidelines or restrictions on the painting or decoration of helmets; these must be followed.
All monies will have to be received 48 hours prior (Aug 12th) to the event via a online payment system (details to come later). Unfortunately we'll be unable to accept cash on site this year.